Wednesday, 8 January 2014

Soviet Body Armour

Cross-posted from Archive Awareness.

Popular history treats Soviet infantry as expendables that overwhelm quality with quantity, but examination of actual historical evidence suggests otherwise. Attempts to lengthen the life of the regular soldier (or, in this case, policeman) predate the USSR, beginning with the Russian Empire. "A catalogue of armour invented by Lieutenant-Colonel Chemerzin" describes his inventions, dating back to 1905:

"The armours vary in mass, the lightest are 1.5 pounds, the heaviest are 8 pounds. They are unnoticeable under clothing. Anti-rifle bullet plates weigh 8 pounds. The plates cover the heart, lungs, stomach, sides, as well as the spine and back over the heart and lungs. Each plate is tested for impenetrability in front of the customer."

A little more on trials:
"In the presence of HIS IMPERIAL MAJESTY, on June 11th, 1905, in the city of Orienbaum, a company of machine gunners performed tests. 8 machine guns fired at a plate made from an alloy created by Lieutenant-Colonel Chemerzin, from a distance of 300 paces. It was hit 36 times. The plates were not penetrated, and did not crack. All non-permanent personnel of the infantry school were present."

The Moscow Capital Police, who ordered the armour in the first place, tested it at 15 paces, from unspecified arms. The performance proved exemplary: "[the armour plates] are impenetrable, and do not produce fragments. The first batch is satisfactory."

The St. Petersburg Capital Police report was more thorough: "The results of the trials were as follows: after firing at the front and back plates, one that weighed 4 pounds and 75 zolotniks [a zolotnik is 4.26 grams] and the other 5 pounds 18 zolotniks, composed of steel and wrapped in thin silk fabric, with a Browning bullet, the bullet penetrates the silk, and makes a dent in the plate, but does not penetrate it, and remains in between the silk and steel. No fragments of the bullet fly out."

The Ust-Izhor training proving grounds achieved positive results when testing the plates with "3 line rifles of the infantry type, from 200, 150, 100, 50, and 8 paces."

The archive file further mentions 4791 sets of body armour, 340 shields, and 200 helmets made of this alloy sent to the Warsaw fortress over the period of 3 months.

The invention made a mark on media. The "Rus" newspaper (#69, 1907) wrote: "I saw a miracle yesterday. A young man, thirty years of age, in a military uniform, stood still in a room. A Browning was pointed at him from half a pace, a frightening Browning, aimed right for the chest, for the heart. The young man waited, smiling. A shot struck, the bullet bounced off.
"See," said the military man. "I barely felt anything.""

"Novoye Vremya" wrote on February 28th, 1908: "The invincible armour and new breastplates are wonderful inventions of our century, and surpass the knight's armour of the past. The scale layers remain the same, but the alloy is different. It is the inventor's secret. A. A. Chemerzin only explained the main idea behind his discovery. A. A. Chemerzin is a Lieutenant-Colonel of engineering forces. He finished a degree in mathematics, then an engineering school. He taught mathematics, while studying chemistry, and a series of experiments led him to exploration of nickel-chromed steel. The alloy was created under high temperature and pressure. Precious metals like platinum, silver, iridium, vanadium, and many others were added to the mix. This led to a very ductile and strong metal, that is 3.5 times tougher than steel. As a result, at three paces, the Mauser bullet could not penetrate a half-millimeter plate. Armour and breastplates were made that were impenetrable for revolver and rifle bullets, which deformed without giving off fragments. The danger of concussions and ricochets was solved.
The armour is expensive, but life is costs more. Putting on the 5 pound armour that covers the front and back, I did not consider it heavy. It is entirely unnoticeable underneath a suit. 7000 breastplates, helmets, and shields were sent to the army in the Far East, but sadly, too late..."

Indeed, the invention did not come cheap. 1500-1900 rubles would buy you a standard set of armour. 5000-8000 could buy you a custom-made set, tailored to your body. Chemerzin also offered the armouring of a carriage (20,000 rubles) and a car's engine compartment (15,000).

In 1916, Chemerzin's armour was tested for pilots. While it performed admirably, a cheaper armour was chosen, manufactured at the Petrograd mechanical and metalworking factories.

I don't have anything about the interbellum period, but the question of protecting infantry was explored during the Winter War.

CAMD RF 81-12040-69

"In 1939, NKV NII-13 manufactured trial batches of steel SN-39 (150 units) breastplates and SNSh-39 (100 units ) breastplate-shields, which were then tested in combat (on Karelia). 

As is stated in our previous report for 1940 (report T-06-77), the breastplate received good reviews from the commanders of the 7th army, but the issue of increasing the strength of the armour in order to ensure bullet protection in close combat was raised. 

To resolve this issue, we have created a new (thickened) breastplate, SN-40A. According to the orders from GAU KA, a decision was made to mass produce the SN-40A, with the following goals in mind:
  1. Manufacture 100-150 SN-40A breastplates, providing protection from model 1908 bullets fired from a rifle or machine gun from 150 meters at 0 degrees and from any distance at 30 degrees.
  2. Manufacture the breastplates in three sizes. Previously, breastplates were produces in one size (small).
  3. Explore the requirements for production of the breastplates and develop blueprints for equipment to mass produce the breastplates.
  4. Conduct proving ground and battlefield trials to determine if the breastplates can be accepted by the Red Army.
The aforementioned mass production of the SN-40A is the topic of this report."

SN stands for Stalnoy Nagrudnik (steel breastplate). 

CAMD RF 81-12040-69

"The manufacturing of the SN-40A was done at the "Industria" factory in Lysva. The breastplates were produced in 3 sizes, and in two thicknesses and weights. The blueprints of the the breastplate are shown in figure 2."

Trials of the SN-40A were performed in the fall of 1941. The results were unsatisfactory. At 5.2 mm (one batch was 4.2 mm), the breastplates were too heavy. Even the air force did not want to use them. One would not immediately expect a heavy breastplate to matter in an airplane, but it does. "Uniform of the Russian Air Force 1935-1955" writes "The medical corps frequently equipped pilots with army type steel helmets. For example, in 1943, elements of the 4th Air Army made it mandatory for Il-2 and Pe-2 gunners to wear "a metallic helmet and special breast shields". However, in practice, when breaking away from a steep dive, the rear gunner was subjected to unacceptable forces, which lowered his capacity of defending the plane from enemy fighters." However, the specific breastplate in question was almost certainly not the SN-40A, but its successor, the SN-42.

The SN-42 was developed in the spring of 1942 and tested in August of the same year by airborne troops. It was composed of 36 SGN type steel, and was 2 mm thick. 500 units were manufactured, and sent to be tested in the army.

Overall view of the breastplate

Breastplate used as a shield

Breastplate used as a shield while prone

The results were as follows:

CAMD RF 81-12040-109

"In 1942, according to the orders from the GAU of the Red Army, the Scientific-Investigative Institute #13 of the USSR NKV, developed a steel breastplate 3.3 kg in mass, 2 mm thick, that protects the main organs of the human body against German submachineguns at all distances, and rifles and machineguns at 300 meters. 
According to GOKO order #2160ss from August 8th, 1942, the steel breastplates were sent to the army, and received positive reviews. The reviews mention the following:
  1. The steel breastplates provide reliable protection from German submachineguns, as well as fragments of mines and hand grenades.
  2. The maneuverability of soldiers with breastplates is almost unimpaired.
  3. Aside from providing protection for the soldier, the breastplate also increases the soldier's morale when performing his duties.
The technical documentation on the steel breastplate was accepted by the GAU of the Red Army on August 7th, 1942, after which the breastplate was mass produced at factory #700 (city of Lysva). At this time, 85,000 breastplates have been produced, distributed as follows:
  1. South-Western Front: 5,000
  2. Stalingrad Front: 3,000
  3. Leningrad Front: 1,000
  4. Volhov Front: 1,000
  5. Don Front: 5,000
70,000 units remain at the warehouse. "

The benefits of the SN-42 breastplate are outlined in more detail in a letter from the deputy commander of the artillery of the 68th Army to the head of the GAU KA, Major-General Hohlov.

CAMD RF 81-12040-109

"In November of 1942, the 57th army received 5000 steel breastplates to test. After the army established the reliability of the breastplates by shooting them from 100 meters with rifles, they issued a small amount (500 units) on a trial basis.
The breastplates were met with distrust, but commanders requested the breastplates in maximum available numbers after testing them in battle. All breastplates available in the warehouses were given out. In battles for Stalingrad, they were exhaustively tested.
Comments by unit commanders and soldiers say that the breastplate, in addition to the steel helmet, is a good and reliable method of protection from bayonets, bullets, and shrapnel.
It is also necessary to point out the morale value of the breastplate. Soldiers equipped with the breastplates that have experienced their reliability go into battle calmly and assuredly.
The artillery supply units are constantly receiving orders for additional breastplates. All these factors combined lead me to believe that the breastplates live up to expectations and are a worthwhile investment.
Please issue 15000 units to the 68th army."

Popular history dictates that only specially formed assault groups were equipped with SN-42 breastplates, but you may already be suspecting that it was not so. The breastplates were not meant for any one kind of soldier, as their instruction memorandum reveals:

CAMD RF 81-12040-69

"A memo on the use of SN-42 steel breastplates
  1. The steel breastplate safeguards the chest and stomach of the soldier in combat from 1) bullets of a German submachinegun at any distance 2) bullets of rifles and machineguns at 300 meters 3) fragments of mines and grenades.
  2. The steel breastplate, thanks to its construction, does not stifle the soldier's movement while walking, running, or crawling.
  3. The breastplate weighs 3.3 kg. To maintain the soldier's endurance and maneuverability, the soldier must be lightened at the cost of his backpack load.
  4. The breastplate can be used by:
    1. scouts, out on a mission.
    2. sappers, while out scouting, making breaches in barbed wire, defusing explosives under enemy fire, etc.
    3. infantry teams during scouting by combat.
    4. submachinegunners, sneaking through the enemy lines, riding as tank infantry, and laying in ambush.
    5. assault teams, attacking a pillbox.
    6. soldiers fighting in city streets.
    7. communications personnel, checking and fixing telephone lines under enemy fire.
    8. any other situation where the commander deems that the breastplates can be usefully applied.
  5. The breastplate can be used in 3 ways.
    1. The breastplate is attached using straps and covers the chest and stomach during movement.
    2. When crawling, the breastplate can be used as a shield.
    3. When removed, the breastplate can be used to cover other parts of the body (right side, left side, head).
  6. The breastplate consists of:
    1. a hull, with the upper and lower plates.
    2. soft lining, attached to the hull with a snap pin.
    3. belts for attaching the breastplate: one on the waist and two on the shoulder
  7. The breastplates are made in three sizes. The breastplate is 2 mm thick.
The breastplates are handed out by the Front Commanders, and are to be used by those armies where they can be usefully applied. Army and Front Commanders should send their feedback on using the breastplates and suggestions to the General Staff of the Red Army, and send a copy to the GAU of the Red Army.

November 11th, 1942"

At the same time as the SN-42, the SShN-42 (steel shield-breastplate) was developed. 

CAMD RF 81-12040-69

The SShN-42 was thicker than the SN-42, at 4.9 mm. Only 25 SShN-42s were produced. The design passed trials, but their subsequent fate is unknown. Is is probable that they joined their regular breastplate cousins in the 5th Army for testing. 

CAMD RF 81-12040-69

In 1942, NII-48 developed its own batch of a spin on breastplates: bulletproof vests. The armour was composed of four plates: two in the front, and two in the back. The vest tied in the front with two bows, like a lifejacket. 

From minutes #215 section 40 of the Sverdlovsk Regional Committee, on August 30th, 1942 (TsDOOSO 4-18-15): 

"On the manufacturing of a trial batch of personal methods of protection for riflemen and machinegunners

The Regional Committee of the All-Union Communist Party of Bolsheviks approves of the initiative of the NII-48 in developing a design of personal armour protection and its mass production, and decrees that:
  1. The director of the Uralmash factory comrade Muzrukov and director of NII-48 comrade Zavyalov must ensure the production of 200 units of personal armour and 50 units for personal armour for Maxim machinegunners by September 20th, 1942.
  2. The VIZ director, comrade Radkevich, must provide to the Uralmash factory 3 tons of rolled 30 HGS steel for production of trial personal armour sets.
  3. NII-48 director comrade Zavyalov is urged to manufacture a trial batch of armour sets and send them to the Red Army for practical tests. In the event that the tests pass and the armour is accepted for mass production, send the proposal to the Regional Committee.
  4.  The General Secretary of the Sverdlovsk All-Union Communist Party of Bolsheviks must provide all necessary resources to factories in order to produce the personal amour sets for riflemen and machinegunners.
Regional committee secretary Andrianov"

500 vests were produced in total. They all were sent to the 5th Army, but did not saw very limited combat. It did, however, see enough that the Germans captured one unit.


"The picture was attached to a message from an intelligence officer in the headquarters of the German 35th Panzer division, informing the command of the 9th Army Corps that the enemy is using new defensive gear on October 2nd, 1942 called an "armoured vest", drawn based on an inspection of the unit captured during a battle."

The picture on the right is also of interest to us.

"Another picture from an intelligence officer in the 35th Panzer division, composed based on the statements of POWs from the 1158th regiment, which revealed that the regiment assault group used this second model of defensive gear on October 2nd, 1942, obtained with the purpose of evaluating its usefulness in battle. Based on the sketch, it was probably a prototype of the SN-42."

Based on reports from the front lines, NII-48 gave their bulleproof vest another try.

CAMD RF 81-12040-69

The change is pretty self-evident: two more plates were added to the front to protect more of the soldier's body. 


CAMD RF 81-12040-109

Here is another breastplate design, this one is a little different. Instead of one lower plate, there are three. The upper plate is composed of two pieces. The back also has a full shirt, not just straps. Its index was PZ-ZiF-20. As its name suggests, it was produced at the Frunze factory (#7). It did not perform as well as the SN-42, but was produced in large numbers anyway, as the army needed all the breastplates it could get. These breastplates were first issued in 1943. 

While the SN-42 was, no doubt, the best Soviet breastplate of the war, work did not stop with it. The financial plan for the second quarter of 1945 of the 6th Department of the Tank Directorate of GBTU KA (CAMD RF 38-11355-2756) mentions the following: 

"An experimental batch of bulletproof vests is being manufactured by the NKTP and NKLP factories. The vests are a new type of protection for Red Army soldiers. The contract is still being processed. The approximate cost is 500,000 rubles."

It is hard to judge how much 500,000 rubles is worth in today's money, but it is no small cost. For example, in 1941, developing the SPG-212 (more commonly known as Object 212) cost only 100,000 rubles. 

Monday, 6 January 2014

Partisan's Companion: Weapons of Combat

The Partisan's Companion is a book distributed among partisans in order to help them combat German forces more effectively. A few sections of the book deal with firearms. This one teaches the user how to handle domestically produced firearms, both military and civilian.

"IV. Weapons of Combat

Remember the main rules of handling weapons

No matter what conditions you are in always keep your weapons ready: clean and functional. Handle them carefully. The weapons must always be ready for battle. Do not plug the barrel, as that will burst the barrel when shooting. Before cleaning a gun, make sure your cleaning equipment is functional and complete (ramrod, rag, screwdriver, mallet, etc).

When checking your weapon, check:
Do the metallic parts have rust, scratches, dents, are mechanisms clean?
Are there cracks or dents in wooden parts?
Do the main mechanisms function correctly (bolt, sight, trigger, etc), is the barrel clear?
Know the main signs of a damaged barrel. You will see them when looking through it at the light:

  1. Rust: dark scum on the barrel. If you run a clean cloth through your barrel and see brown spots, it is a sure sign of rust in the barrel.
  2. Rash: scattered spots of rust around the barrel.
  3. Bulging: a perpendicular ring-shape (continuous or interrupted) along the barrel.
Inspection and handling ammunition

The ammunition should be clean and free of dents or cracks, burrs, patina. Check that the primer is not too deep, the bullet does not wobble, and is not sunk too deep into the casing. Wipe the functional ammunition with a clean cloth dabbed with grease. This will keep them from rusting.

Cleaning and lubricating your gun

Timely cleaning and correct lubrication make it function perfectly. If the gun is not used often, clean it no less than once every ten days. After shooting, clean the barrel and parts of the weapon that are affected by gases. When possible, clean the weapon completely, and lubricate it. In the following 3-4 days, wipe the barrel with a clean white cloth. If you see rust or fouling, clean it again. If not, lubricate the barrel.

Carry clean and soft cloths for cleaning, as well as soft hemp fibre. Only use the hemp for cleaning. 

Use a base compound for cleaning the gas system. Lubricate parts after cleaning them. Remember that excess grease dirties the gun, and makes it misfire. Wash hardened grease off complicated parts with gasoline or kerosene, then wipe them dry and lubricate them.

Cracks and other places where it is hard to insert a ramrod should be cleaned in the following way: sharpen a stick of the necessary size, wrap it in a rag saturated in a base, lubricant, or kerosene.

In the winter, use winter lubricant. Apply the lubricant in a thin layer with a cloth. A thick layer of grease will freeze, and the gun will not work.

If you don't have winter lubricant, use kerosene or liquid from #1 or #3 incendiary bottles, as it contains kerosene or gasoline. 

Always carry your gun with you and do not leave it unattended. Never disassemble all the unit's guns at once, cleaning should always be done in turns.

Fig. 40: Rifle model 1891/30
Fig 44: Self-loading rifle model 1940

Rifle model 1891/30
Purpose: a partisan's main weapon for striking the enemy with fire, bayonet, and stock.
Combat characteristics: best range is 400 meters. Combat rate of fire: 10 shots per minute. Maximum range: 2000 meters.

Self-loading rifle model 1940
Combat characteristics: best range is 400 meters. Combat rate of fire: 25 shots per minute. Maximum range: 1500 meters.

Fig. 43. Small caliber TOZ-8 and TOZ-9 rifles. 1 - stock; 2 - stock grip; 3 - barrel assembly; 4 - sight; 5 - barrel; 6 - front sight; 7 and 9 - barrel bed; 8 - trigger guard.

Small caliber TOZ-8 and TOZ-9 rifles
Combat characteristics: the small caliber rifle does not make a loud sound and has very weak recoil, simple to use, is disassembled easily, and is flawless in operation. These characteristics allow the TOZ rifles to be widely used in partisan squads.
The TOZ-8 rifle is single-shot, and the TOZ-9 has a five round magazine. The TOZ-8 has a rate of fire of 7 shots per minute, the TOZ-9 - 10 shots per minute.
The maximum range is 250 meters. 

Fig. 46: Grenade model 1933.

Grenade model 1933
Purpose and combat characteristics: to strike the enemy with fragments in defense and offense. Throw at a range of 30-40 meters. Radius of shrapnel: 25 meters with safety casing, 5 meters without safety casing.

Fig. 49. F-1 grenade.

Purpose: for striking the enemy only in defense. 

Impact type anti-tank grenade
How to throw the grenade: figure 52.
Take the grenade in your right hand, so that the safety is firmly pressed against the handle.
With your left hand, open the slider, and insert the fuse gently. The fuse should enter the grenade freely.
Remove the safety pin.
Throw the grenade and hide. The grenade will explode when it hits the target.
Do not touch a grenade that did not explode. Destroy it with another grenade or with a rifle.

Fig. 52. How to throw an anti-tank grenade.

Fig 53. SMG model 1940 PPD and SMG model 1941 PPSh

SMG model 1940 PPD and SMG model 1941 PPSh
Purpose: an SMG strikes the enemy with fire at close range. An SMG can fire single shots or in bursts (short bursts of 2-4 rounds or long bursts of 20-25 rounds).
Combat characteristics: maximum range: 500 meters. Rate of fire: single shot - 30 RPM, short bursts - 70 RPM, long bursts - up to 100 RPM.

Fig. 67. DP hand-held machinegun.

DP hand-held machinegun
Purpose: the DP hand-held machinegun is the main automatic weapon for destroying groups and important single targets up to 800 meters away, and aircraft up to 500 meters away.
Combat characteristics: rate of fire: 80 RPM. Fire in short bursts (3-6 shots). Maximum range: 1500 meters."

The next few pages are for mortars, which I will skip, as they fall outside the scope of this blog.

"Anti-tank rifle
The anti-tank rifle is a fearsome weapon against enemy tanks and armoured cars. The Red Army uses two anti-tank rifles: a single shot and a semi-automatic. Both use a 14.5 mm armour piercing bullet. Firing at tanks 150-200 meters away is best, but their bullets can penetrate armour even further.

Fig. 74. Single shot Degtyarev anti-tank rifle.

Single-shot Degtyarev anti-tank rifle
Weighs 16.5 kilograms, and is 2 meters long (fig. 74). The rifle is served by a crew of two: a gunner and an assistant. The single-shot rifle can make 5-6 aimed shots per minute. The rifle is loaded manually. Insert a bullet into the opening on the top and ram it in. Close the bolt with an energetic motion forward. If the bolt does not lock, you will get misfires. If there is a misfire, fire again after pulling back the firing pin once more. If there is one more misfire, extract the round and insert a new one. If there is a misfire again, check the firing pin and firing mechanism for dirt or damage.  

To carry the rifle, activate the safety. Pull the bolt far back and turn it up-right 90 degrees. When the firing pin enters the safety box, the rifle is on safe. 

To remove the bolt when cleaning, press the release button underneath the left side of the barrel assembly.

Make sure the rounds are slightly oiled. Dry rounds may cause misfires.

Fig. 75. Simonov anti-tank rifle.

Self-loading Simonov anti-tank rifle
Weighs 20.3 kg, 2.2 meters long (fig. 75). Practical rate of fire: 15 RPM. The rounds are loaded from a five round box magazine, into which a clip of five rounds is inserted. It is possible to insert the clip from the top without removing the magazine.

To remain invisible to the enemy, conceal yourself before battle. A reliable hiding place for an anti-tank rifle crew can be made in a simple anti-tank ditch. Hide in it if the tank is close, then emerge after it goes over and fire at its engine compartment. 

Also fire at the lower part of the turret, where there is usually ammunition, and at tracks next to drive wheels. When firing at an armoured car, aim for the engine and lower turret. If you hit the engine group, gas tank, or ammunition, the AP-I bullet will ignite or explode the tank or armoured car.

You may also fire at other targets: concentrations of enemy soldiers, guns (the bullet can penetrate their shields), machinegun nests, and airplanes.


Fig. 76. Anti-tank rifle grenade. Grenade warhead, stabilizer, fuse, striker, ramrod.

Anti-tank rifle grenade
The Serdyuk model 1941 anti-tank rifle grenade (VPGS-41) is used in cases where it is impossible to get closer than 40 meters to the enemy tank. The grenade consists of five parts: the warhead with an explosive substance, the striker mechanism, the fuse, the ramrod, and the stabilizer. The grenade is usually stored in parts. Assemble it before battle, as shown in figure 76. Put the stabilizer on the ramrod. Screw the ramrod into the striker casing, and then the warhead. In this condition, carry the grenade into battle.

The grenade should be armed in battle. Screw off the striker, and insert the fuse, making sure that the ends of the striker safety pins are 3-4 mm apart. Screw the striker into the warhead. Slide the stabilizer up the ramrod until the hull of the grenade.

The grenade is ready for battle. All you have to do is insert it into the rifle. Load the rifle with a round with no bullet. With you right hand, pull the safety pin from the grenade. You may fire.

Fire directly, at a range of 60-70 meters. Conceal yourself in a trench or behind a tree. If there is a group of tanks, fire at it indirectly from 120-140 meters, at an angle of 40-50 degrees.

Revolver and Pistol

Revolver model 1895
Purpose: to attack and defend at close range, and during hand to hand combat.
Combat characteristics: 7 shots in 15-20 seconds, caliber: 7.62 mm
Cleaning: A cleaning rod is used to clean and lubricate the barrel and cylinder. Thread hemp fibre or a cloth through the cleaning rod so it will enter the barrel with light pressure. Saturate it with a base solution. Put the rod into the barrel and move it back and forth 7-10 times, turning it in the direction of the rifling."

Fig. 77. How to remove the cleaning rod.

The copy of the Partisan's Companion that I have access to is, sadly, missing several pages from this section here.

"Know how to precisely strike the enemy
Aim at vulnerable places: chest, stomach, head. To aim properly, hold your head straight. Put your fingers on the pistol (revolver) handle like shown in figure 84, freely, without too much pressure.

Fig. 84. How to hold a pistol while shooting.

Press on the trigger with the first joint of your index finger. Your thumb should be parallel to the barrel. When shooting while standing or kneeling, hold your hand in the air gently and relaxedly. When shooting while braced, keep your hand with the pistol or revolver in the air. For additional stability, brace your left hand against something and hold your right hand at the wrist.

Know how to wield a shovel

Learn how to fortify your position during enemy fire. For this purpose, carry a shovel (small shovel, sapper's spade, pickaxe). If you don't have one, use any shovel with the handle shortened to 40-50 cm.

How to fortify

Before digging, examine your location and determine if it will be convenient to shoot from. If no, crawl to the side to find a better place. Then, begin digging.

Fig. 85. How to dig a personal trench lying down. 1) Put your rifle to the right. 2) Strike the dirt under you with your shovel. 3) Hold your head close to the ground.

Fig. 86. Using your personal trench.

Put the rifle with the bolt handle down to the right, at arm's reach. This way, it won't get in the way of your digging, and will be close enough to grab. 

Turn on your left side, without raising your head. Take the shovel with your left hand up and your right hand towards the blade and cut at the ground under you. First, throw the dirt forward, building up a parapet, giving you protection from enemy fire. Then, throw the dirt to the side. while digging, keep your legs apart, and keep your head to the ground (fig. 85).

When your hole is 20-25 cm deep, crawl back a little and deepen it for your torso and legs (fig. 86). 

Fig. 87. Required parapet thickness from various types of dirt. Sand, agricultural dirt, clay, swampy dirt, compressed snow, loose snow.

An open trench should be camouflaged using dirt, grass, and branches. Since different types of dirt resist a bullet differently, the parapet thickness depends on the type of dirt (fig. 87).

Digging in the snow

Remember, that if the snow is 40-50 cm deep, you can dig to the ground underneath. If it is deeper, you don't need to dig all the way down. Compress loose snow so that your cover is no less than 40 cm tall. Snow that you dig out should be thrown forward to thicken your parapet. When digging, make sure the snow is clean. Dark spots will reveal your position.

Use your surroundings

The forest, trees, ditches, stumps, bushes, etc, can protect you. You can use weaved or wooden fences as camouflage. Remember to make portholes in them. You can also use a building to hide from enemy bullets. Dig a trench inside the building, and use the dirt to reinforce the wall outside (fig. 88). 

Fig. 88. A trench in a building.

If you must use residential houses in battle, use lower and basement floors. Cover the windows with sand and dirt bags. Leave narrow portholes for observation and fire.

Wednesday, 1 January 2014

Fashion Police


"Excerpt from an order of the 1st Mountain Infantry Division

Item #3. On the wearing of ties.

A red rag is the sign of a communist. Wearing red ties and armbands is forbidden. Wearing a brightly coloured tie is unsuitable for a German soldier.

General Lantz
Translated by Intendant 3rd grade Skormorovskiy"

Monday, 23 December 2013

First Try


"Self-loading carbine developed by Kalashnikov and Petrov, according to technical-tactical requirements from the GAU KA Artillery Committee #2941.

The carbine (right view) is shown on the photo."

Saturday, 21 December 2013

Molotov Cocktails

If you people that know next to nothing of history, they will tell you that Molotov Cocktails are a Russian invention. People that know a little bit more will tell you that they are a Finnish invention. Keep going further, and you will be told that the original use of petrol bombs dates back to the Spanish Civil War.

Turns out, the first group was correct. However, these bombs came around long before Molotov accomplished anything of value, and didn't even have a proper name. In late May of 1915, Stavka's General on Duty wrote to the head of the Chief Military-Technical Directorate:

"The High Command Headquarters received several proposals for measures of repressing the enemy in response to their use of poisonous gases. These measures consist of burning the crops that are currently growing in Germany and Austria. In order to achieve this, we require widespread manufacture of incendiary devices of various weights..."

The answer to this need can be found later, in the GVTU's correspondence with the Office of the Chief of the Organization of Aviation in the Active Army, in a letter complaining about improper alcohol bottles mysteriously appearing.

"In order to produce incendiary devices for burning of crops, the Directorate acquired 100,000 empty wine bottles from the Petrograd Excise, which were prepared by a group of lower ranks under the supervision of the Chief of the Central Air and Sea Warehouse, as well as a specially appointed officer. The bottles were packaged by packagers of government wine warehouses. The GVTU, having developed this type of weapon, notes that the thick wine bottles may not break if they strike soft ground. Therefore, they acquired wine bottles from the Excise, and did not send other wine bottles, or beer bottles. The GVTU does not know how other wine bottles or beer bottles reached the army squads. The chief of Engineering Supplies of the South-Western Front also informed the Directorate that only vodka bottles have been sent out."

Such confusion! It is not surprising that the devices never received a proper name.

Let's skip forward a few decades and look at Soviet application of these incendiary devices.


"Instructions on the use of incendiary bottles", approved by Stalin himself on August 12th, 1941.

"1. The purpose of incendiary bottles.

Incendiary bottles are one of the simplest and most reliable means for destroying tanks, armoured cars, transport trucks, warehouses, landed airplanes, and enemies in cover. In the hands of a brave soldier, they are a fearsome weapon. Skilled and sudden use can not only strike the enemy, but cause panic and compromise enemy organization.
The bottles work as follows: when they hit a solid object, the bottle breaks, and the liquid inside of it ignites, either with a match attached to the bottle, a special metallic igniter, or a capsule inside the bottle.
The Red Army uses bottles with:
  1. Self-igniting "KS" fluid.
  2. #1 and #3 flammable mixes.
2. Properties of flammable fluids

KS fluid

Bottles filled with KS fluid come in two varieties:
  1. Pure,
  2. With additives to make the fluid more viscous (stickier).

The two mixtures vary in colour. Pure KS fluid is yellow-green in colour, and the fluid with additives is dark brown. The unit weight of the first is 1.8, second is 1.4. Both fluids smell like rotten eggs. When exposed to air, they ignite at a temperature of 800-1000 degrees, creating a large amount of white smoke.

The sticky KS fluid, when impacting a tank or car, covers the view ports and glass, and heats up tank parts on impact. The smoke blinds the crew, fluid that seeps inside the tank destroys the engine, and can ignite the gas tanks. The crew is forced to exit the tank. When this fluid comes in contact with clothing, it sticks to it, quickly penetrates, and can cause severe burns. One bottle of sticky KS fluid burns for 2-3 minutes.

Pure KS fluid has similar properties, but sticks less, and does not burn as long (for 1.5-2 minutes). It is very hard to put out KS fluid fires. It can be put out with sand, dirt, and water. Note that in events of insufficient dirt coverage, or when the water evaporates, the fluid can ignite again.

#1 and #3 mixes

Mix #1 is a viscous substance, yellowish in colour, with unit weight of 0.8. It excels at spreading out over metal surfaces and sticking to them. The fluid ignites with special devices (igniters). It burns at temperatures of 700-800 degrees, and lets out small amounts of black smoke when burning. One bottle burns for 40-50 seconds. After burning, a hard and opaque film remains. Properties of mix #1 are identical to the sticky KS fluid.

Put out fires from mix #1 with sand, dirt, water, by covering it with a greatcoat or tent. After putting out the fire, it will not start again by itself.

Mix #3 is less viscous than mix #1, with unit weight of 0.9, and ranging from brown to light lemon in colour. It burns for about one minute. Otherwise, it is identical to mix #1.

3. Bottles with KS fluid

Regular beer bottles, 0.5-0.75 liters in volume, are used (fig. 1). The bottle contains a layer of water or kerosene to prevent the fluid from coming into contact with air. The bottle is closed with a rubber cork. The cork is reinforced with metal wire and tape.

Fig. 1. Incendiary bottle with KS.

The bottles are placed in wooden crates for transport. The crates are filled with dirt. Use loose, clay-free dirt, so that the package is lighter. The size of the crate should be such that the bottles could be covered with dirt from all sides. The dirt should go up to at least the corks. The top and bottom of the crate should be clearly marked. When transporting the bottles, follow the following precautions:
  1. Do not throw the crates with bottles, or flip them over.
  2. Carefully observe the condition of the package. If it starts smoking, determine which bottle is emitting smoke. Carefully, using rubber gloves, extract this bottle and bury it. Fill the gap with dirt. 
  3. If one or many bottles ignite, bury the entire crate.
Fig. 2. Incendiary bottles in a crate.

When carried, the bottles should be placed in bags with barriers (fig. 3). If no such bags are available, use rags, paper, hay, grass, etc. During normal movement, carry the bag over your shoulder. When running, hold the bag with your left hand and prevent it from hitting anything. 

Fig. 3. Placing incendiary bottles in a bag.

4. Bottles with mixes #1 and #3

Regular vodka bottles, 0.5-0.75 liters in volume are used. The bottles are filled with fluid and closed with a wooden cork. The bottles are equipped with special matches (fig. 4), glass capsules, or metallic igniters. 

Fig. 4. Incendiary bottle with #1 mix.

The match consists of a wooden stick covered in an incendiary substance (fig. 5). Two are attached to the cylindrical part of each bottle with rubber bands. The matches are ignited by friction before throwing the bottle.

Glass capsules (fig. 5) are filled with fluid that ignites when it comes in contact with the incendiary fluid. The capsule is placed in the bottle, and activates when striking a tank or car. In order to make placing capsules in the bottle more convenient, each cork should have a string through a hole in it. 

Fig. 5. A special match (top) and two types of capsules for igniting #1 and #3 mixes. Sizes are in millimeters.

A metallic igniter (fig. 6) is a pipe containing a capsule detonator, a spring with a safety pin, and a firing pin. Before throwing the bottle, the pin is removed. When throwing the bottle, the spring is freed, the firing pin strikes the detonator, and an explosion occurs. The igniters are attached to the bottle with string.

Fig. 6. Metal igniter.


Bottles with incendiary fluid are placed in the same crates as KS bottles. Each crate contains the needed amount of igniters (one capsule or metallic igniter for each bottle, or two matches wrapped in paper), and one strip of sandpaper for every three bottles (for bottles with matches). Transportation rules are the same as for KS bottles.

When issuing bottles with #1 and #3 mixes, each soldier receives one strip of sandpaper, and a necessary amount of matches wrapped in paper. The soldier then inserts the matches into rubber bands on the bottle, leaving the paper on them. The incendiary substance on the matches should be pointed towards the bottom of the bottle. Place the glass capsules inside the bottle. Tie metallic igniters to the side of the bottle. 

5. Uses of incendiary bottles.

In order to destroy enemy tanks with bottles, each soldier should carry 3 bottles, one with KS fluid and two with #1 and #3 fluid. The soldier positions himself in a trench, crack, shell crater, behind a fence, in a hole, a ditch, or any other concealment (fig. 7 and 8), camouflaging himself and hiding from bullets and shrapnel.

Fig. 7. Throwing an incendiary bottle from a roadside ditch.

Fig. 6. Throwing an incendiary bottle from behind a bush.

The soldier observes tank movements. When they approach, the soldier prepares his bottles for throwing. If his bottles use matches, he tears off the paper covers.

When the tank or car is 15-20 meters away, the soldier takes a KS bottle, holds the cylindrical part, and throws it at the tank, followed by one or two #1 and #3 bottles. If the bottles have matches, light them before throwing. #1 and #3 bottles may be held by the neck, if it is more comfortable. Throw bottles with metallic or capsule igniters in the same manner as bottles with matches, after the KS bottle (if several types are available). 

Throw the bottles while standing or crouching (fig. 9), aiming for your target. Aim for the engine (a tank has it in the rear, an armoured car in the front), observation ports, poorly sealed hatches (fig. 10). 2-3 well placed bottles can ignite the tank or car (fig 11).

Fig. 9. Throwing an incendiary bottle while crouching.


Fig. 10. Vulnerable parts of a tank for incendiary bottles.

Fig. 11. A KS incendiary bottle hit a tank.

Directions for a tank destroyer group

A tank destroyer group consists of 2-3 soldiers. One or two have incendiary bottles and grenades. One has a machinegun or a submachinegun, and is the commander. 

After receiving a mission, the commander must:
  1. Pick a position from which incendiary bottles and grenades may be thrown comfortably and stealthily. If necessary, give the order to dig a trench.
  2. Observe his sector.
  3. Ready data for firing from his machinegun.
  4. Ready the bottles for use against the enemy (check the matches and igniters, presence of ampules in bottles).
  5. Check readiness of grenades. Five grenades should be prepared for throwing at tanks, primed and with safety on. Tie them together with string or wire. Four grenades should point one way, one the other. When throwing the grenades, remove the safety of the fifth, take its handle, and throw it at the tracks.
  6. Mark locations 15-20 meters away where the first KS bottle should be thrown.
Groups position themselves as indicated on fig. 12, pointed towards likely directions of enemy tanks. Intervals between groups should be no more than 25-30 meters. Communication is performed right-to-left. 

Fig. 12. Positioning tank destroyer groups. (Б) is a soldier with bottles and grenades, (  ) is the group commander with a machinegun or submachinegun. 

When the tank is 15-20 meters away, the commander gives an order: "At the tank, fire!" On this command, the soldiers throw bottles (fig. 13 and 14) and when the tank catches fire, grenade bundles at its tracks. The commander looks for the enemy crew, and then eliminates of captures it.

Fig. 13. Throwing incendiary bottles from a trench.

Fig. 14. Throwing incendiary bottles from an ambush at a bridge.

When the objective is complete, or when the group is out of ammunition, they stealthily retreat to a previously arranged spot, determined by the unit commander.

Directions for tank destroyer units

After receiving his objective, the unit commander must:
  1. Analyze the situation and determine possible tank routes.
  2. Give his teams their tasks and locations.
  3. Determine the actions taken by teams when tanks arrive.
  4. Determine a signal for throwing bottles.
  5. Determine the resupply procedures for grenades and bottles.
  6. Indicate a rendezvous point after the mission is completed.
  7. Determine the location for a medical aid site and his observation point.
The unit acts in a manner to let the front of the column through, and then strike the whole column simultaneously (fig. 15 and 16).

Incendiary bottles are a powerful weapon. Their success depends on your bravery, agility, and resolve.

Fig. 15. A tank destroyer unit in a settlement. (K) is the unit commander, (Б) is a soldier with bottles and grenades, (  ) is a soldier with a submachinegun.

Fig. 16. A tank destroyer unit on a road. (K) is the unit commander, (Б) is a soldier with bottles and grenades, (  ) is a soldier with a submachinegun.

Safety measures and first aid

In trenches, incendiary bottles, especially KS bottles, should be kept in separate sections. When setting up a storage location, place them in a small pit or a location where they are safe from impact.

Handle with care. Ensure that they do not knock against one another or hard objects. If a bottle breaks, remove all other bottles from the vicinity, and cover it in dirt. Make sure that the fluid does not come in contact with skin or clothing.

If the fluid gets on clothing, immediately remove the affected clothing, or separate it from the body with sand, dirt, water. Until medical aid can be administered, keep a wet towel or rag in contact with burnt skin.

Chief of the Military Chemical Defense Directorate of the Red Army, Major-General of the Technical Forces, Melnikov

Military Commissar of the Military Chemical Defense Directorate of the Red Army, Regimental Commissar Krylov

August 8th, 1941"

Saturday, 7 December 2013

DT-29


This photograph shows a tank DT-29 machinegun, mounted on a motorcycle. Photographs of motorcycles with infantry DP-27 machineguns are very common, as that machinegun was eventually adopted for this purpose. However, that was not due to the superiority of said gun, but due to a requirement for parts commonality with infantry.

The DT-29 was, in fact, superior to the DP-27 for this task. 63 rounds in a compact disk magazine (compare with 47 rounds in the DP's massive flat disk), and a much better mount. While the DP just had its bipod resting on the sidecar front, the DT-29 had an adjustable mount, resulting in better ergonomics for gunners of all heights. Another benefit of the mount was that it could be easily extended for the purpose of anti-aircraft fire. On a motorcycle equipped with the DP-27, the gunner had to dismount and fire from a crouched position next to the motorcycle if he wanted to achieve very large gun elevation angles.

Sunday, 1 December 2013

Taubin's Grenade Launcher

In the mid 1930s, an automatic grenade launcher made by engineer Taubin was tested in the USSR. There were some good things about it, like a satisfactory shrapnel radius for grenades and a high rate of fire: 436 RPM! However, there were also many problems. It jammed a lot (7.2% of the shots), and the extractor had to be replaced 30 times over 587 shots. The precision, especially on the horizontal axis, was unsatisfactory.

However, Taubin did not give up. He wrote to Molotov, Voroshilov, and Kaganovich, with pleas to produce his mortar, complaining the the Red Army lacks the ability to suppress hardpoints on reverse slopes at a range of 500-1200 meters at the company level. The letters contained such gems as: "The production of an automatic grenade launcher, the value of which was identified by the army in December of 1937, is being held back intentionally... The employees of Design Bureau 16 consider it necessary to create a commission in order to confirm the facts stated in this letter and identification of the parties guilty of artificially delaying the progress of the automatic grenade launcher."

In response to these claims, Division Commander Grendal sent his own letter, remarking that the Red Army possesses company level mortars for such tasks, and "In order to reduce the amount of correspondence between us in the future, it is suggested that your workers ask Artkom in person (available from 14:00 to 17:00) regarding issues they do not understand."